IPSO - Commands

Below are the command IPSO commands that can be used,

IPSO commands

newimage Installs IPSO OS from the local machine
newpkg -m localhost Checkpoint package Install
ipsctl -a displays all of the IPSO Settings and Values
ipsctl -a ifphys:eth-s5p1:errors|more display errors on eth-s5p1
ipsctl -w net:ip:tcp:default_mss 1460 Change MSS to 1460
netstat 1 shows network stats every second
ipsofwd list displays ipso properties (flowpath, etc)
ipsofwd slowpath turns off flows (flowpath turns back on)
fsck -fyb 32 check the file system on a flash based nokia (KB 1355433)


printenv print environment variables
install install an image across the network
boot boot an image

clish commands

show useful-stats Shows Disk, VRRP, RAM summary
show package all
show package active
show package inactive
show images
show image current

delete image [name]

set hostname testbox Set Hostname
set date timezone-city "Greenwich (GMT)" Set Timezone
set static-route default nexthop gateway address priority 1 on Set default gateway
set static-route nexthop gateway address on Add static routes
set interface eth2 speed 100M duplex full active on --- add interface eth2c0 address enable Add an interface
set interface eth-s3/s1p1 active off
set hostname testbox set hostname
set package name name [on | off] set package name

add arpproxy address macaddress 0:a0:1b:3e:33:f1 Add Proxy arp
add ntp server version 3 prefer yes Add an NTP server
add package media local name [opt/packages/IPSO-3.9.tgz]
add host name testbox ipv4 set hostname assignment


0 Responses to "IPSO - Commands"

Post a Comment

Search This Blog

Blog Archive

Total Pageviews