ScreenOS Cheat Sheet


COMMAND INPUT

The colors designate the actual ScreenOS command in blue, while the user input (policy name, numeric value, etc) is red. 

Basic Operation

get hostame - Displays the hostname of the device 

set hostname atlanta-firewall - Sets the hostname to atlanta-firewall 

get domain - Displays the domain name of the device 

set domain skullbox.net - Sets the domain name to skullbox.net 

get chassis - Displays chassis information such as temperature, fan status, and slot information 

get system - Displays hardware and software information 

get config - Displays the complete running configuration 

get zone - Displays all zones present in device 

set zone name warehouse - Create new zone named warehouse 

unset zone warehouse - Removes zone warehouse 

get interface - Displays all physical and sub-interfaces 

get interface | include tun - Displayes all intefaces starting with tun (tunnel intefaces) 

get interface ethernet0/2 mip - Displays MIP information on specified interface 

get arp - Displays all number of sessions, MAC addresses,and IP addresses learned by the device 

get ssh - display active management SSH sessions

get counter statistics - Displays statistics for all interfaces 

get counter statistics interface ethernet0/2 - Displays statistics for ONLY specific interface 

get performance cpu - Displays CPU utilization over the last 1,5, and 15 minutes 

get performance session - Displays session utilization over the last 1,5, and 15 minutes 

get dns host settings - Displays DNS servers and assigned interfaces 

get dhcp - Displays DHCP information and assigned interfaces 

get admin - Displays management information such as access ports and filtered IP addresses 

get event - See Troubleshooting Section 

get session - See Troubleshooting Section 

get address untrust - Displays addresses in the untrust zone 

get ike gateway - Displays all gateways configured for VPN 

get vrouter trust-vr - Displays all vrouter information and routes associated with trust-vr 

get sa - Displays information about IKE (VPN) Gateways 

get ntp - Displays network time protocol information 

get service - Displays protocols both native and custom 

set service "RDP" protocol tcp src-port 0-65535 dst-port 3389-3389 Creates a service named RDP with source ports from 0-65535 and a destination port of 3389. 

Security

set admin manager-ip 10.15.15.0 255.255.255.0 - Sets administrator access from 10.15.15.0/24 

Policies
set policy from Cisco2821 to DMZ902 192.168.105.0/24 Any HTTP permit log - Sets policy from zone Cisco2821 to DMZ902 allowing 192.168.105.0/24 (from Cisco2821) and allows communication to any IP range in zone DMZ902 over port 80 (HTTP) and logs all traffic. This assumes 192.168.105.0/24 is contained in the address list. 

set policy from Cisco2821 to DMZ902 192.168.105.0/24 Any ANY nat src permit log - Sets policy from zone Cisco2821 to DMZ902 allowing 192.168.105.0/24 (from Cisco2821) and allows communication to any IP range in zone DMZ902 over any port and logs all traffic. This assumes 192.168.105.0/24 is contained in the address list and this policy also performs NAT. 

set policy from Untrust to warehouse Any MIP(216.93.242.16) DNS permit - Sets policy allowing any IP from Untrust (Internet) zone to MIP with IP 216.93.242.16 allowing ONLY DNS traffic 

set policy from Untrust to warehouse Any MIP(216.93.242.16) ANY deny log - Sets policy allowing any IP from Untrust (Internet) zone to MIP with IP 216.93.242.16 specifically DENYING ALL traffic and logging it 

set policy from Guest to Untrust 192.168.109.0/24 Any HTTP nat src dip-id 5 permit - Sets policy from zone Guest with IP 192.168.109.0/24 to Untrust (Internet) with any IP allowing port 80 (HTTP) performing NAT and using DIP with ID five 

set policy from Untrust to warehouse ras.skullbox.net VIP(ethernet0/2) RDP permit log - Sets policy from zone Utrust (Internet) with hostname ras.skullbox.net to zone wharehouse using the specified VIP on Ethernet0/2 allowing RDP traffic and logging it 

set policy id 43 disable - Keeps policy id 43 in the configuration, but disables it 

set policy id 13 - Modifies policy ID 13 
set src-address fin_servers - Adds group fin_servers from address book 
set src-address fin_users - Adds group fin_users from address book 
set src-address fin_network - Adds group fin_network from address book 
set src-address sales_department - Adds group sales_department from address book 

set policy id 43 - Modifies policy ID 43 
set service DNS - Adds service DNS to policy 
set service FTP - Adds service FTP to policy 
set service HTTPS - Adds service HTTPS to policy 
set service ICMP-ANY - Adds service ICMP-ANY to policy 

set zone Untrust screen tear-drop - Sets a screen on interface Untrust for tear drop attacks 
set zone Untrust screen syn-flood - Sets a screen on interface Untrust for syn flood attacks 
set zone Untrust screen ping-death - Sets a screen on interface Untrust for ping of death attacks 
set zone Untrust screen land - Sets a screen on interface Untrust for land attacks 

Network Configuration

set interface ethernet0/2 phy full 1000mb - Sets Ethernet0/2 to full-duplex and 1Gbps (not auto-negotiate) 

set interface ethernet0/0 ip 216.93.242.12/26 - Sets IP information on Ethernet0/0 

set interface ethernet3/0.1 tag 205 zone warehouse - Creates a sub-interface from Ethernet3/0 using 802.11q VLAN tag 205 and puts the new interface into the warehouse zone 

set inteface ethernet0/3 route - sets interface Ethernet0/3 to route mode 

set inteface ethernet0/5 nat - sets interface Ethernet0/5 to NAT mode 

set brgroup 3 0 - Enables group number zero on PIM slot 3. A maximum of 8 bgroups can be configured 

Bgroup Configuration
set interface bgroup 3/0 port ethernet3/1 - Add physical interfaces to Bgroup3/0 
set interface bgroup 3/0 port ethernet3/2 - Add physical interfaces to Bgroup3/0 
set interface bgroup3/0 zone warehouse - Assigns bgroup3/0 to the warehouse zone 

set interface ethernet0/5 phy link-down - Physically disables ports 
unset interface ethernet0/5 phy link-down - Physically enables ports 

set interface tunnel.5 zone Untrust - Creates tunnel interface with ID 5 assigned to zone Untrust 
set interface tunnel.5 ip unnumbered interface ethernet0/2 - Sets tunnel.5 as an unnumbered interface with Ethernet0/2 as a gateway 

set interface ethernet3/10 ip managable - Enables management interface on IP address assigned to Ethernet3/10 

set interface ethernet3/10 manage ping - Enables ping on Ethernet3/10 
set interface ethernet3/10 manage ssh - Enables ssh on Ethernet3/10 
set interface ethernet3/10 manage snmp - Enables snmp on Ethernet3/10 
set interface ethernet3/10 manage web - Enables web on Ethernet3/10 
set interface ethernet3/10 manage telnet - Enables telnet on Ethernet3/10 

DHCP Configuration
set interface ethernet3/3 dhcp server service - Enables DHCP server on Ethernet3/3 
set interface ethernet3/3 dhcp server option lease 1440 - Sets DHCP lease time (in minutes) 
set interface ethernet3/3 dhcp server option gateway 192.168.101.1 - Sets gateway provided by DHCP 
set interface ethernet3/3 dhcp server option netmask 255.255.255.0 - Sets subnet mask provided by DHCP 
set interface ethernet3/3 dhcp server option domainname skullbox.lan - Sets domain suffix provided by DHCP 
set interface ethernet3/3 dhcp server option dns1 8.8.8.8 - Sets DNS provided by DHCP 
set interface ethernet3/3 dhcp server option dns1 4.4.4.2 - Sets DNS provided by DHCP 
set interface ethernet3/3 dhcp server ip 192.168.115.200 to 192.168.115.200 - Sets range of IP addresses for DHCP lease 

set interface ethernet 0/2 dip 4 216.93.242.13 216.93.242.13 - Sets interface Ethernet0/2 with a DIP address (ID four) with a range of 216.93.242.13 to 216.93.242.13 

set interface ethernet0/2 mip 216.93.242.14 host 192.168.152.15 netmask 255.255.255.255 vr "trust-vr" - Sets Ethernet0/2 to use 216.93.242.14 as a mapped IP to 192.168.152.15/32 using virtual router trust-vr 

set interface ethernet0/2 vip interface-ip 3389 RDP 192.168.131.15 

Routing
set route 10.145.12.0/24 interface bgroup3/0 gateway 10.145.12.254 description "extranet" - Sets routing desinated for 10.145.12.0/24 to use interface bgroup3/0 with a gateway of 10.145.12.254 and a description called extranet 

set route 192.168.99.0/24 interface tunnel.5 description "dr-vpn" - Sets routing desinated for 10.192.168.99.0/24 to use interface tunnel.5 with a description called dr-vpn 

SNMP Configuration
set snmp community "xoop" Read-Write Trap-on traffic version v1 - Specifies a read-write community called xoop 
set snmp host "xoop" 10.16.0.92/32 src-interface bgroup3/0 trap v1 - sets the source interface and destination for SNMP (version one) requests 
set snmp location "rack 34" - Specifies SNMP location information 
set snmp contact "Erik Rodriguez" - Specifies SNMP contact information 
set snmp name "corp-firewall" - Specifies SNMP device information 
set snmp port listen 161 - Specifies SNMP listen port (default is UDP 161) 
set snmp port trap 162 - Specifies SNMP trap port (default is UDP 162) 

Syslog Configuration
set syslog config 192.168.105.76 - Sets the syslog destination IP 
set syslog config 192.168.105.76 facilities local0 local1 - Sets the syslog facilities 
set syslog src-interface ethernet3/2 - Sets the interface used to reach the syslog server 
set syslog enable 

NTP Configuration
set ntp server 216.93.242.12 - Enables NTP with 216.93.242.12 as time source 
set ntp server src-interface ethernet3/0 - Uses interface Ethernet3/0 to reach NTP update source 
set clock ntp - Enables system clock to sync with NTP 
exec ntp update - Forces snyc of clock with NTP server 

Troubleshooting

trace-route 216.93.242.12 from ethernet3/0 - Performs a traceroute from a specific interface 

ping 216.93.242.12 count 100 from ethernet3/11 - Performs ping to 216.93.242.12 with 100 ICMP echos from interface Ethernet3/11 

Sessions
get session src-ip 192.168.1.35 - Displays session information for source device 192.168.1.35 

get session dst-ip 216.93.242.12 - Displays session information for destination device 216.93.242.12 

get session src-port 3636 - Displays session information for source port 3636 

get session dst-port 3389 - Displays session information for destination port 3389 

clear session Immediately clears all software sessions 

Events
get event policy-id 35 - Displays any events logged regarding policy ID 35 

get event level alert Displays any logged events deemed Alerts (requiring immediate action) 

get event start-date 2011-05-03 Displays events starting from May 3rd 2011 

get event start-time 21:26:42 Displays events starting from 9:26:42 PM 

get event include SPI Displays events which include SPI (IKE activity)  

Comments

11 Responses to "ScreenOS Cheat Sheet"

Anonymous said... November 16, 2012 at 11:39 AM

Thanks for stealing my cheat sheet. http://www.skullbox.net/

Unknown said... December 4, 2014 at 11:15 AM

set policy from Untrust to warehouse Any MIP(216.93.242.16) DNS permit

By default the policy above will also permit traffic initiated in the reverse direction (form warehouse to Untrust) since a MIP is a static NAT.

Love the page

Anonymous said... August 21, 2015 at 4:55 AM

nice post… simple and useful :).... Plz visit my site...! Thanks
Technical Support Engineering Services in Delhi,

Ram Chauhan said... March 4, 2019 at 4:57 AM

Impressive!! and we are also one of the Cheapest Wireless Mobile Network Signal Booster In India.
Best Mobile Network Signal Repeater

Anonymous said... April 16, 2020 at 9:19 PM

It is very helpfull for everyone, thanks for sharing this information..... Kalyx transcanding connections

Anonymous said... May 4, 2020 at 5:28 AM

It is very helpful for everyone, thanks for sharing this information..... CISCO Firewall

Unknown said... February 1, 2021 at 12:13 AM

he method of finding the IP address your router applies varies depending on the device or computer you are using as the router-help.

gaming UAE said... September 2, 2021 at 10:48 PM

Top Selling Cisco Dual Router in Uae, Gigabit WAN VPN Router in Uae, Wired Network Router in Uae
https://gccgamers.com/networking/routers/cisco-dual-gigabit-wan-vpn-wired-network-router-rv042g.html

TMIS said... March 3, 2022 at 3:27 AM

GCI Speed Test

CloudInfotech said... January 31, 2023 at 5:17 AM

Grandstream GSC3506 SIP speaker offers modern features to address the public through announcements. It offers crystal clear HD audio, SIP paging, multicast paging, and a 30-Watt HD speaker. It is the ideal speaker for any organization. Contact Cloud Infotech to get the best device at the most affordable price.

Cloud Infotech said... March 27, 2023 at 2:22 AM







The dinstar ip pbx systems integrate different physic interfaces like LTE/GSM, FXS, FXO, E1, Wi-Fi into one box, offer rich functionality of IP PBX, easy to deploy, simplify the management, are the most cost-effective VoIP PBX in market for SOHO, Small-and-medium-sized businesses, Enterprises applications.




Post a Comment

Search This Blog

Blog Archive

Total Pageviews