Saturday, July 2, 2011

Configure Layer 3 port-channel (EtherChannel) between Cisco Router and Switch

Router:

interface Port-channel1
ip address 10.4.4.2 255.255.255.252
!
interface GigabitEthernet0/0/0
no ip address
channel-group 1
no shutdown
!
interface GigabitEthernet0/0/1
no ip address
channel-group 1
no shutdown

Switch:

interface Port-channel1
no switchport
ip address 10.4.4.1 255.255.255.252
!
interface GigabitEthernet1/0/3
no switchport
no ip address
channel-group 1 mode on
no shutdown
!
interface GigabitEthernet2/0/3
no switchport
no ip address
channel-group 1 mode on
no shutdown
at

5 comments:

  1. UnknownSeptember 19, 2018 at 9:04 PM

    Get information How Does Network Firewall Work?

    ReplyDelete
  2. AnonymousApril 16, 2020 at 9:15 PM

    It is very helpfull for everyone.. thanks foe sharing this information Kalyx transcanding connections

    ReplyDelete
  3. AnonymousMay 4, 2020 at 5:25 AM

    It is very helpful for everyone, thanks for sharing this information..... CISCO Firewall

    ReplyDelete
  4. nikhilMay 14, 2020 at 4:52 PM

    great info CISCO Meraki Switches Firewall

    ReplyDelete
  5. AnonymousJuly 11, 2021 at 11:46 PM

    The Linksys re6500 setup is available in the USA. This router helps you to more connectivity. these solve your connectivity problem and boost the speed of the internet. It is a dual-band wireless range extender. when you install setup. you don't need any CD for installation. visit now: Linksys re6500 setup


    ReplyDelete